The built-in Microsoft Windows Update service may not update your drivers properly. Instead, use The Modem / ISDN Driver Update Utility for Intex. It is intelligent software that automatically recognizes your computer's operating system and modem / isdn manufacturer and model to find the most up-to-date drivers for it. There is no risk of installing the wrong driver. The Modem / ISDN Driver Update Utility downloads and installs your drivers quickly and easily.
Intex Modem Драйвер
Download: https://tinurll.com/2vCMZN
To find the latest driver, including Windows 11 drivers, choose from our list of most popular Intex Modem / ISDN downloads or search our driver archive for the driver that fits your specific Intex modem / isdn model and your PC's operating system.
You'll find an entry named sr0 if you have an Optical Disk drive(CD, DVD, Blu-Ray, etc.). If you have no optical drive (as in the case of NetBooks and newer machines), then the dongle's storage will appear as sr0, and IntexModem binary'll work for you. If that's the case, you don't need to follow these steps. Else, plug in your modem, wait a few seconds and then repeat the ls /dev command to look again in /dev directory.
Inside /dev directory, you'll find a new entry /sr1 along with previous /sr0. This is a Read Only partition present on your modem, which must be ejected everytime you plug in the dongle, for switching the modem from removable storage state to modem state.
Newer usb-modeswitch versions contain 20a6:1105 and 20a6:f00e config files by default and so you don't need to do the above steps to get it working. As a result, if you're running a recent Ubuntu release, the modem'll work 'out of box' without any extra configuration.
Can anyone help me out on connecting INTEX 3.5G 7.2 Mbps (aka 普创E003) Wireless USB modem on Ubuntu? Initially it is recognized as a storage device and the modprobe command does not create any impact on it. Here are the steps I have followed:
I have tried this all. I am using the INTEX 3.5G 7.2 Mbps (aka 普创E003) Wireless USB Datacard modem and have tried to configure udev rules and kernel modules too but nothing has worked.Can anyone tell me what is the real problem?
Most of the modem Drivers problems relate to Modem Drivers for Windows 7, Modem Drivers for Windows XP, PCI Modem Drivers or USB Modem Drivers. For any of these or other Modem Drivers, use the Download link below to run a Free Drivers Scan and get automatic Driver Updates.
Troubleshooting modem driver problems manually is a lengthy process. If you have the driver disc available, you can uninstall and reinstall the modem drivers. To achieve this in Windows XP, perform the following steps:
please, i need help my laptop is not recognizing my etisalat modem. Its like i mistakely uninstalled somethings and i have tried reinstalling the modem, but my laptop is not recognizing it or accept it unlike before. but it works in other laptops
iam dlink dwp157 wireless modem its working properly in previously but in the last 2days onwards its not working properly showing always databaseerror what is the problem whether its problem related to modem or system problem
The command +FCLASS=8 (+FCLASS= - Service Class Indication) puts the modem in voice mode. Speakerphone and TAD modes are subsumed under the more general heading of voice mode, and use a particular subset of voice mode commands to implement their respective features and functions.
Use this command to enable or disable automatic DCE hang-ups in the data and facsimile modes. The +VNH command is part of a group of commands used for call discrimination. Call discrimination is a means for the modem to supply the DTE or host system with the information and means to discriminate between data, FAX, and voice calls. The automatic hang-up control is just one of the controls used to manage call discrimination. Refer to Section 5.3.1 of ITU-T Recommendation V.253 (02/98) for a full description of call discrimination and how the +VNH command is used.
Requests for the modem's DTMF/tone reporting capabilities are made using this command. For each system configuration in voice mode (i.e., speakerphone and answering machine), the modem reports the capabilities that are enabled for the configuration.
Use this command to set the ringing tone goes away timer before originating a call. The ringing tone goes away timer defines the amount of time the modem waits between ringing tones before assuming that the remote station has gone off-hook. The default is 50, and each value represents a 0.1 second increment.
Use this command to set the ringing tone never appeared timer before originating a call. The ringing tone never appeared timer defines the amount of time that the modem waits for an initial ringing tone. If a ringing tone is not detected within this interval, the modem assumes that the remote station has gone off-hook. The default is 10, and each value represents a one-second increment.
Use this command to set the silence detection sensitivity () and silence detection interval (). The parameter defines the line noise sensitivity level in decibels. The parameter specifies the amount of time the modem waits before reporting silence to the DTE. It is used for determining the presumed hang-up (SILENCE), after which the modem sends -s to the DTE. The default is 50 (5 seconds).
If the user decides to pick up his local (parallel) phone while in the middle of a speakerphone call, the DCE senses the transition and sends the application a -H sequence. The application, which should always be screening for DLE-shielded codes in the background when the modem is in the voice mode, can then respond to the -H (for example, by resetting speakerphone buttons or doing whatever else needs to be done with the speakerphone interface).
When the user is in the middle of a speakerphone call, call waiting (hold operation) can be initiated when the user hears the call waiting signal through the speaker. Call waiting entails the following communication between the application and the modem.
The speakerphone application is loaded. The modem is initially idle in data mode. The user then decides to pick up the phone to place a speakerphone call. Picking up the phone should initiate the following chain of events.
The speakerphone application is loaded. The modem is initially idle in data mode. The user then decides to place a speakerphone call either by entering the number without first going off-hook or by selecting a number previously stored in the application. When the user tells the application to dial, the following events occur:
If you own devices with wired-only (Ethernet) connections and your router or modem is too far away or your wireless network doesn't cover enough area in your home, an old router can solve your problems. By installing the free DD-WRT firmware on the old router, you can turn it into a wireless bridge or repeater. This means that even devices that can't reach your main router can get connected through the old router anywhere you put it.
File: intex_web_cam_it-350wc.zipComments: Intex it-350wc Driver. File Contents: No file content information available at this time. List of all Intex Windows 7 Camera DriversBrowse Intex Drivers by DeviceIntex Graphics / Video Drivers Intex Modem Drivers Intex Ethernet / Network Drivers Intex Removable Drive Drivers Intex Audio / Sound Drivers Intex USB Drivers
So the question comes, why does it happen? If a mobile phone or USB modem Internet works fine in one Windows version, why does it not work in another Windows version? The reason is different features and functionality of different Windows versions.
Generally for GSM mobile phones and USB modems, the dial-up phone number is *99# or *99***1#. Leave the username and password fields blank.
For CDMA mobile phones and USB modems (Tata Photon+), the dial-up phone number is #777 and username and password is internet (all in small letters).
what about MICROMAX 3G USB MODEM ? (purchased on 2009)i have tried to install its inbuilt software, installed without any error.But whenever i tried to run its installed application from desktop shortcut, the application it says modem not detected. i have tried various tricks described on various websites. but NO SUCCESS.i m using WINDOWS 8 RTM X86 ( as an Administraror User).While my beetal usb 3g modem works fine on same laptop (windows 8).The above micromax modem works fine with windows 7.
Hai Vishal,I am having a weird problem.When i connect to internet with my Huawei airtel E173 modem(updated with Mobile Partner firmware) it disconnects after sometime and reconnects automatically.Please help.Thanks.
Hello vishal,I have a problem ,i have installed windows 8.1 ,but when i connect my micromax 353g modem it fails to install drivers ,so that it shows no device.I have tried every possible methods like compatibility,etc. pls help 2ff7e9595c
Comments